2G / 3G / 4G GSM/DCS 900 / 1800 / 2100MHz cell phone tower booster
Product Description
2G / 3G / 4G GSM/DCS 900 / 1800 / 2100MHz cell phone tower booster
Product Description
A mobile phone signal repeater provides the ultimate solution in any area where cellular communications can not work well due to leak of signals. The repeater device features easy installation & operation, build-in indoor antenna and no interference
Advantage of network signal booster
1. Enhance Mobile Phone Signal Strength |
2. Improve Communication Quality |
3. Reduce Cellphone Radiation |
4. Protract Cellular Battery Life |
5. Economic Building Cost |
6. Easy Operation |
7. Easy Installation |
8. Build-in Power Supply |
Specification of 900 /1800 / 2100 MHz network signal booster
Frequency | 900 / 1800 / 2100MHz |
Gain | Uplink 60±3dBi |
Downlink 65±3dBi | |
Export Power | 20dBm±3dBm |
Power Supply | Input AC100V-240V 50/60Hz 1.2A |
Output 5V2.0A | |
Size | 222 x 172 x 22 mm |
Weight | 1.3kg |
Coverage Area | 1000M2 |
Pass Band Ripple | ≤3dBi |
I/O Impedance | 50Ω |
Connector Type | N female connector |
Noise Figure | ≤4dBi |
Transmission Delay | ≤0.5μs |
Ambient Temperature | -10ºC~60ºC |
Reliability | To the GB6993-86 standard |
Electromagnetic Compatibility | To the ETS300 694-4 standard |
Function | a) Power supply LED denote |
b) Export power LED denote |
Packing List:
Signal booster + power adaptor + outdoor log periodic antenna + indoor ceiling antenna + 15m cable + 5m cable + power adaptor
Installation Approaches of network signal booster
1.Fix up outdoor antenna reception on housetop and point to signal tower.
2.Connect outdoor antenna to "outdoor" port in repeater machine through cable
3.Connect outdoor antenna(s) to "indoor" port in repeater machine through cable also.
4.Plug power adaptor into AC power socket and finish installation
Steps of describe the work of network signal booster
1) The outside antenna receives the signal from the nearest mobile base station.
2) The outside antenna sends the received signal through the coax cable to the installed Repeater.
3) The Repeater accepts the low signal and improves it.
4) The improved signal goes to the inside antenna through the connection coax cable.
5) The inside antenna send the improved good signal to your mobile phone.
Technique Supporting of network signal booster
1.If still no signal receipt after activated repeater,please check if outdoor antenna point to signal tower or elsewhere have strong signal and check if strength achieve-70DBM.
2.If can not call out ,please adjust the direction of outdoor antenna.
3.If strength is not steady,please check if outdoor &indoor antenna are too close ,please ensure the outdoor and indoor antenna have distance of 20 meters at least, with a wall between and not at the same horizontal line(outdoor antenna can be one floor higher than the repeater and indoor antenna).
4.Indoor antenna and repeater better to be minimum 4 meters far away from nearby windows and doors.
Product Categories : Booster for Europe > Booster for Europe
Premium Related Products