Addressable Flashing Beacon Base
Basic Info
Model No.: TX7302
Product Description
Addressable Flashing Beacon Base
The TX7302 Addressable Flashing Beacon Base is an alarm warning device used to notify persons in the vicinity of the occurrence fire emergency in order the person to take appropriate measures. The unit adopt multi-application device starting from the types, parameters and wiring layout in single unit. The TX7302 Addressable Flashing Beacon Base is powered by the communication bus. The TX7302 can change into different encoding modes such as Single-encoding Mode, Dual-encoding Mode 1 and Dual-encoding Mode 2 using a programming tool. And it has different starting modes such as started by a detector, a controller or other front-end linkage. In addition, the alarm tone can be configured according to the requirement from 17 different tones.
The unit manufactured base on the requirement of EN 54 part 3, European Standard. The unit is aesthetically pleasing with unobtrusive design that will complement modern building designs and its plug-in type assembles make installation and maintenance more convenient to the installer. The unit is compatible to the TX7004 Analogue Intelligent Fire Alarm Control Panel, produced by single manufacture T&A, to avoid addressable communication compatibility problem.
Feature and Benefits
- EN54-3 Compliance
- Built-in MCU processor and digital addressing
- 17 tones Programmable sound output
- Encoding modes such as Single-encoding Mode, Dual-encoding Mode 1 and Dual- encoding Mode 2
- Programmable Evacuate or Pre-alarm/Evacuate signal
- 8 highlights LED status cluster
- Be started directly by a detector
- Onsite adjustable parameters
- Loop power input
- Aesthetically pleasing design
- Universal mounting with fix base for simple installation
- Listed LPCB Pending
- Compliance EN54-3
- Input Voltage Loop Power: 24VDC [16V to 28V]
- Current Consumption Standby: ≤0.8mA, Alarm: ≤5mA
- Protocol/Addressing T&A, Value range from 1 to 254
- Address Sequence Single-encoding Mode: Alarm
Dual-encoding Mode 2: 1st Warning / 2nd Alarm
- Strobe Light 8 highlights LED
- Material / Colour ABS / White glossy finishing
- Dimension / Height Diameter 140mm / 59.1mm (with a cover)
- Weight 198g (with a cover)/180g (without a cover)
- Class Type A, Indoors
- Operating Temperature -10°C to +55°C
- Ingress Protection Rating IP30
- Humidity 0 to 95% Relative Humidity, Non condensing
Product Categories : Intelligent Fire Alarm System > Accessories for Fire Alarm System